Railroad Thread
Moderators: FrankM, el, Dmmoore
Re: Railroad Thread
Beach?He's taken it out to Copalis a few times but every time we've tried to go when I was in the plane it was high tide so we couldn't land, so I've yet to land on a beach.
http://www.flickr.com/photos/simpilot45 ... otostream/
Salt!
Aluminum
Bring on the glass cockpit, leather seated, fuel injected 180 hp model...
Commercial Pilot, Vandelay Industries, Inc., Plant Nutrient Division.
-
- Posts: 2130
- Joined: Sat Feb 02, 2008 2:02 am
Re: Railroad Thread
Wash it off.Beach?He's taken it out to Copalis a few times but every time we've tried to go when I was in the plane it was high tide so we couldn't land, so I've yet to land on a beach.
http://www.flickr.com/photos/simpilot45 ... otostream/
Salt!
Aluminum
Bring on the glass cockpit, leather seated, fuel injected 180 hp model...
"A boat in the harbor is a safe boat, but that's not what boats are for."
Re: Railroad Thread
I was communicating with a forum regular about shipping locomotives overseas.
Here are some recent photos of some EMD SD9043 locomotives being sent to "northern Quebec" (perhaps the Quebec North Shore and Labrador railroad). As can be seen they are easily lifted by heavy duty cranes and placed on wooden skids in a flat hold. I suspect there is a lot of blocking and bracing installed before the ship leaves town.
http://www.railpictures.net/viewphoto.p ... 878&nseq=4
http://www.railpictures.net/viewphoto.p ... 877&nseq=3
These 4,300 hp locomotives were derivatives of the very unsuccessful SD90 model with an EMD "H" engine and 6000 horsepower. Their 4-cycle engines were a departure for EMD who otherwise only builds 2-cycle engines. Manufactured in the mid-1990's some SD90's were retired after only a few years of service. Here is a photograph of one being cut up. http://www.railpictures.net/viewphoto.p ... 02&nseq=39
The SD9043's were essentially SD90's with lower horsepower engines that could later be upgraded with the larger H engine. Because of the failure of the larger engine, I do not believe any upgrades were ever performed.
Here are some recent photos of some EMD SD9043 locomotives being sent to "northern Quebec" (perhaps the Quebec North Shore and Labrador railroad). As can be seen they are easily lifted by heavy duty cranes and placed on wooden skids in a flat hold. I suspect there is a lot of blocking and bracing installed before the ship leaves town.
http://www.railpictures.net/viewphoto.p ... 878&nseq=4
http://www.railpictures.net/viewphoto.p ... 877&nseq=3
These 4,300 hp locomotives were derivatives of the very unsuccessful SD90 model with an EMD "H" engine and 6000 horsepower. Their 4-cycle engines were a departure for EMD who otherwise only builds 2-cycle engines. Manufactured in the mid-1990's some SD90's were retired after only a few years of service. Here is a photograph of one being cut up. http://www.railpictures.net/viewphoto.p ... 02&nseq=39
The SD9043's were essentially SD90's with lower horsepower engines that could later be upgraded with the larger H engine. Because of the failure of the larger engine, I do not believe any upgrades were ever performed.
Re: Railroad Thread
It has been a slow week on the Off Topic Thread so here are a couple of amusing videos:
1) Time Lapse Photo Showing Installation of Large New Truss Bridge in Chicago.
This was done a few days ago; the text shows that Mayor Ron Emanuel is responsible for this project as part of his Building a New Chicago Infrastructure Program. You've got to love politicians. (This project was in the works long before he became mayor.)
http://www.youtube.com/watch?v=ByCin67M ... e=youtu.be
2) New Hire on the London Midland and Scottish - 1939
Here a young lad begins his career as an engine cleaner wiping down locomotives (and being tricked into cleaning the inside of a smoke stack). Later he graduates to being a fireman as a colleague is promoted to driver.
http://www.youtube.com/watch?v=5SEicpqd ... e=youtu.be
1) Time Lapse Photo Showing Installation of Large New Truss Bridge in Chicago.
This was done a few days ago; the text shows that Mayor Ron Emanuel is responsible for this project as part of his Building a New Chicago Infrastructure Program. You've got to love politicians. (This project was in the works long before he became mayor.)
http://www.youtube.com/watch?v=ByCin67M ... e=youtu.be
2) New Hire on the London Midland and Scottish - 1939
Here a young lad begins his career as an engine cleaner wiping down locomotives (and being tricked into cleaning the inside of a smoke stack). Later he graduates to being a fireman as a colleague is promoted to driver.
http://www.youtube.com/watch?v=5SEicpqd ... e=youtu.be
Re: Railroad Thread
I like the second video J (haven't seen the first one yet).
On the slightly lighter note, somewhere in a deep, sparsely populated Russia you find an abounded narrow gauge rail trail. You wonder where it might be going, so you build your own light rail platform powered by a gasoline engine, take two of your craziest buddies, some fuel, some food and of course some vodka and... that's just the beginning of a great adventure.
From Russia with love: http://www.youtube.com/watch?v=qaPJWch0 ... re=related
PS. I love the soundtrack.
On the slightly lighter note, somewhere in a deep, sparsely populated Russia you find an abounded narrow gauge rail trail. You wonder where it might be going, so you build your own light rail platform powered by a gasoline engine, take two of your craziest buddies, some fuel, some food and of course some vodka and... that's just the beginning of a great adventure.
From Russia with love: http://www.youtube.com/watch?v=qaPJWch0 ... re=related
PS. I love the soundtrack.
- Sir Gallivant
- Posts: 1103
- Joined: Fri Feb 01, 2008 7:17 pm
Re: Railroad Thread
You say narrow gauge, at times I thought it to be variable gauge. And then suddenly the track varied more than the cart, Should have seen that one coming, but I was surprised none the less
Veni, Vidi, Velcro!
-
- Posts: 1420
- Joined: Sat Apr 12, 2008 6:16 pm
Re: Railroad Thread
The roadbed goes on forever and the party never ends!
Railroad archeology. River Bug on most of its length marks Polands' eastern border. In '45 a bridge was blown off and as it often happens during the war, it was blown as the train was passing through it. Very hot and dry summer caused the levels of water to drop to its lowest level since...well... no one really knows.
As in a B class horror movie for the first time since 1945 the bridge and the train bound together for eternity emerged from bellow the water.
As in a B class horror movie for the first time since 1945 the bridge and the train bound together for eternity emerged from bellow the water.
Re:
Any way to get a higher resolution photo? They look interesting....small, but interesting.Railroad archeology. River Bug on most of its length marks Polands' eastern border. In '45 a bridge was blown off and as it often happens during the war, it was blown as the train was passing through it. Very hot and dry summer caused the levels of water to drop to its lowest level since...well... no one really knows.
As in a B class horror movie for the first time since 1945 the bridge and the train bound together for eternity emerged from bellow the water.
Commercial Pilot, Vandelay Industries, Inc., Plant Nutrient Division.
- Not_Karl
- Previously banned for not socially distancing
- Posts: 4192
- Joined: Thu Nov 12, 2009 6:12 pm
- Location: Bona Nitogena y otra gaso, Argentina
Re: Re:
That's what she said....small, but interesting.
International Ban ALL Aeroplanies Association, founder and president.
"I think, based on the types of aircraft listed, you're pretty much guaranteed a fiery death."
- Contemporary Poet flyboy2548m to a Foffie.
"I think, based on the types of aircraft listed, you're pretty much guaranteed a fiery death."
- Contemporary Poet flyboy2548m to a Foffie.
Re: Railroad Thread
Sure. Follow the link and click to enlarge: http://podlasie24.pl/wiadomosci/biala-p ... -bbfe.html#
Any way to get a higher resolution photo? They look interesting....small, but interesting.
And this one has more pictures and I think even better ones: http://prochowniaterespol.blogspot.com/ ... lu-cd.html
Re: Railroad Thread
Thanks. Interesting stuff.
Re: Railroad Thread
Since at least two people enjoy the subject of railway archeology, I will continue along the same line. Significantly north and slightly west of the above spot is another old line where hastily retreating Germans blew up some bridges to slow down the advancing Soviets. This line was never rebuild after the war, so after a short hike through some forest and bushes you feel as if moved backward in time, as if the bridges got blown hours or days ago.
[/img]
Another bridge on the same line:
This one still in tact:
[/img]
Another bridge on the same line:
This one still in tact:
Re: Railroad Thread
Thanks...Neat stuff.Since at least two people enjoy the subject of railway archeology, I will continue along the same line.
In this link, the bridge is not of archeological significance, but the paint job is.
http://bridgehunter.com/mo/st-louis/frisco/
Commercial Pilot, Vandelay Industries, Inc., Plant Nutrient Division.
- Not_Karl
- Previously banned for not socially distancing
- Posts: 4192
- Joined: Thu Nov 12, 2009 6:12 pm
- Location: Bona Nitogena y otra gaso, Argentina
Re: Railroad Thread
Excellent, thanks!Since at least two people enjoy the subject of railway archeology, I will continue along the same line.
International Ban ALL Aeroplanies Association, founder and president.
"I think, based on the types of aircraft listed, you're pretty much guaranteed a fiery death."
- Contemporary Poet flyboy2548m to a Foffie.
"I think, based on the types of aircraft listed, you're pretty much guaranteed a fiery death."
- Contemporary Poet flyboy2548m to a Foffie.
NEAR TOTAL TRAIN DISASTER!!!!
Some random thoughts...
The joke about women and their bad ability to judge distances...
...or maybe all the rest of us and our ability to judge distances... I'm thinking that it would certainly scare the crap out of most folks, and adjust hair-do's, that train clearances are not quite that tight that hanging just your head out isn't still leaves some room to spare????
http://www.youtube.com/watch?v=jmuI3ICNAuc
http://news.yahoo.com/blogs/sideshow/gi ... 41491.html
The joke about women and their bad ability to judge distances...
...or maybe all the rest of us and our ability to judge distances... I'm thinking that it would certainly scare the crap out of most folks, and adjust hair-do's, that train clearances are not quite that tight that hanging just your head out isn't still leaves some room to spare????
http://www.youtube.com/watch?v=jmuI3ICNAuc
http://news.yahoo.com/blogs/sideshow/gi ... 41491.html
Commercial Pilot, Vandelay Industries, Inc., Plant Nutrient Division.
- Sir Gallivant
- Posts: 1103
- Joined: Fri Feb 01, 2008 7:17 pm
Re: Railroad Thread
Well, what is the clearance typically between two railway carriages? Or the distance to various poles holding signals and wires? Could be interesting if another head was sticking out of a window on the opposing train.... Dang, can't get the sound of two coconuts colliding out of my head now.
Veni, Vidi, Velcro!
Re: Railroad Thread
A common track center distance in the US is 13 feet. If you consider that a standard railway car is ten feet six inches wide you get about 7.5 feet - a little more than 2 meters between the cars. In orther words the young lady was not in too much danger. However freight trains are known to have occasionally experience shifted loads such as the following. Rather than coconuts, the resulting sound might have been more like the swish of a guillotine.
http://www.railpictures.net/viewphoto.p ... 391&nseq=2
http://www.railpictures.net/viewphoto.p ... 391&nseq=2
Re: Railroad Thread
Errrr....more like 2.5 feet... / well short of 1M
13 ft center to center.
Car on the left takes 5.25 feet of it. Car on th right takes 5.25 feet
13 -5.25 - 5.25 = 2.5
I suppose you could have meant 13 feet between the closet rails which would give you another ~5 feet.
13 ft center to center.
Car on the left takes 5.25 feet of it. Car on th right takes 5.25 feet
13 -5.25 - 5.25 = 2.5
I suppose you could have meant 13 feet between the closet rails which would give you another ~5 feet.
Commercial Pilot, Vandelay Industries, Inc., Plant Nutrient Division.
Re: Railroad Thread
I flubbed it. 2.5 feet is about right. Coconuts it is.
- Sir Gallivant
- Posts: 1103
- Joined: Fri Feb 01, 2008 7:17 pm
Re: Railroad Thread
Here is a video showing how a new EMD locomotive was placed inside the Las Vegas Conventon Center for a recent Mining Exposition. It is not every day you see a locomotive passing down Las Vegas Blvd.
http://www.progressrail.com/prs-vegas-video.html
http://www.progressrail.com/prs-vegas-video.html
- Thunder Down Under
- Posts: 266
- Joined: Sun Feb 03, 2008 1:40 am
- Location: In the Bush
Re: Railroad Thread
Myth or Fact?
Have just read an article about a train disappearing in the old Wild West of the USA. in 1848.
The train was a large freight owned by The Kansas Pacific Company and it ran into a ferocious storm (ala New York etc.) and at its heart was a giant waterspout.
Over 16,000 feet of track were washed away when the eye of the storm passed over a particularly remote part of the railroad. Unfortunately, the train was somewhere on that stretch of track when it happened.
Despite numerous searches up to modern times no trace of it has been found.
Fact of Fiction?
TDU
Have just read an article about a train disappearing in the old Wild West of the USA. in 1848.
The train was a large freight owned by The Kansas Pacific Company and it ran into a ferocious storm (ala New York etc.) and at its heart was a giant waterspout.
Over 16,000 feet of track were washed away when the eye of the storm passed over a particularly remote part of the railroad. Unfortunately, the train was somewhere on that stretch of track when it happened.
Despite numerous searches up to modern times no trace of it has been found.
Fact of Fiction?
TDU
I don't have a plan........therefore nothing can go wrong.....
Re: Railroad Thread
Never heard of that, so I'm going with "fiction."
LOL100% incorrect Ever hear of Ferry Permit? issued for Non airworthy aircraftno such thing as "barely airworthy" it's either Airworthy or Notyou still have to find a crew willing to fly this "barely airworthy" heap
Who is online
Users browsing this forum: No registered users and 4 guests